02 - BTI - We know your business

1006
BONDING + SEALING
�����
Sealing compound MS-P
High grade, neutral, elastic sealing compound on MS polymer basis
g Verified safety
Complies with the provisions of DIN 18540, strained
joints in construction engineering
g Versatile joint sealing compound
Very good adhesiveness on all surfaces common in
construction; no fringe contamination on porous
surfaces such as marble and granite; fungicidal
properties thus also suitable for wet rooms
g good resistance to environmental influences
UV-resistant, good resistance to chemicals,
coating compatible* and overcoatable*
g Suitable for use in varnishing facilities
Silicone, solvents and isocyanate-free
* Terms acc. to DIN 52452, part 4
Range of application:
Strained joints in construction engineering, complies
with the provisions from DIN 18540; joint gaps between
door and window frames; any other construction and
expansion joints; sealants in ventilation, air con and
cold store facilities; use in varnishing facilities; natural
stone joints
Processing instructions:
When gluing to surfaces ensure they are clean, dry,
stable and free of grease. Pre-treat porous and soft
surfaces with S400 primer. Smooth joints with BTI
smoothing agent (item no. 001880). Tools can be
cleaned immediately after use with white spirit.
Carrying out an adhesion test on every surface is
recommended. MS-P is coating compatible but due to
the variety of colors and varnishes we recommend a
compatibility test first. The color may take longer to dry
with alkyd resin colors.
Technical data
(at +20 °C/55% relative humidity)
Usage temperature +1 °C to +30 °C
Skin building time approx. 10 min
Curing 2 mm/24 hrs
Shore A hardness 25 ±5
Temperature stability -40 °C to +90 °C
Max. permitted permanent movement absorption 25 %
Joint width min. 5 mm to max. 30 mm
Storage 12 months
Item Unit Color Container Content
number Pieces ml
012272 1/12 white cartridge 290
012273 1/12 gray cartridge 290
002092 12 white tube 580
002093 12 gray tube 580
002097 12 black tube 580
08-128 A/P/T 08128
The details specified in this publication are based on our current knowledge and experience. Due to the abundance of possible processing and application influences this information does not release the processor from performing his
own tests and trials. Legally binding assurance of certain characteristics or suitability for a concrete implementation objective can not be derived from this information.
WWW.bTI-gROUP.COM
08
A
557