02 - BTI - We know your business

1006
the adhesive must be applied in
a diamond shape
�����
4W-external tape
For external window sealing according to current technical standards
g the correct physical Sd value gap in conjunction
with the internal 4W-tape
According to guidelines for window installation and
current technical standards, the required Sd value
gap of minimum 1 to 10 (external/internal) has
been complied with easily (approx. 0.048/65.9)
g construction movements can be accommodated
The 4W-tape is pliable in a transverse direction and
can therefore be optimally adjusted to construction
movements. This guarantees a long-lasting seal on
connection joints.
g it is not necessary to gloss paint the parapet
By using 4W-Adhesive plus you can achieve a
reliable, long-lasting and even seal on uneven
parapets.
g can be plastered and painted over
The fleece-backed upper side of the tapes can be
plastered over with standard plaster or painted over
with building dispersion paints.
g One tape with two uses
One or both sides can be used. Both sides are
fleece-coated.
Rolls in box
item unit Roll length Width
number m m mm
016519 240 40 50
015896 200 40 70
015897 120 40 100
015898 80 40 150
016520 80 40 200
03-166 A/P/T 03
Range of application:
For vapor porous sealing of connection joints in external
areas
Processing instructions:
When gluing to surfaces ensure they are clean, dry,
sturdy and free of grease, oil and other anti-adhesive
elements. Unwind the 4W-tape and cut to required
lengths including a 5 cm excess. Remove the masking
paper from the adhesive strip, press the fixing strips
carefully onto the backs of the windows or the window
frames of all sides that need to be sealed. Use 4W-
Adhesive plus to glue on the masonry side. Read the
information on the technical specification sheet.
technical data
Base high quality PE foil
Both sides fleece-coated
Temperature stability -30 °C to +80 °C
UV resistance 3 months
Store min. 12 months
at +10 °C to +25 °C in its original packaging
Usage temperature +5 °C to 35 °C
Color gray (porous)
Water vapor diffusion equivalents
Air layer thickness Sd value 0.048 m
Water vapor diffusion resistance value 76 µ
Rolls are individually shrink-wrapped
item unit Roll length Width
number m m mm
000287 40 40 50
000288 40 40 70
000290 40 40 100
000293 40 40 150
000294 40 40 200
03-166 A/P/T 03
WWW.bti-gROuP.cOM
03
79