02 - BTI - We know your business

WWW.bti-gROuP.cOM
03
�����
Flexible ventilation hose
100% flex ble outlet vent connection, suitable for all outlet vent models made from synthetic material
g connection sleeves are used for the connection
The screw thread bracket guarantees
secure fixing to the outlet vent.
g A 100/70 mm reduction piece enables all
connection variants to be used
g the welded in spring steel coil enables a double
bend to be made
g Hose-Dia.: 118.5 mm
Meets Din 1986
item unit Designation Length Dia.
number Pieces mm mm
011430 10 Flexible ventilation hose 290 – 480 100 or 70
03-132 A/P 03132
The details specified in this publication are based on our current knowledge and experience. The consumer is responsible for carrying out his or her own personal checks and tests when using our products to ensure that they are suitable
66 for use in the particular environment. The information contained within this publication does not infer a legally binding assurance of the specific properties or the suitability for a precise intended use.
1006
Material:
Adhesive tapes for roofs and walls
R-Flex
g the connection sleeves and reduction piece are
made from PVc
g Flex ble pliable PVc hose with welded-in spring
steel coil
g Screw thread bracket is made from galvanized
steel
g temperature range: -55 °c to +140 °c
Range of application:
Ventilation, air conditioning and environmental
technology.
Functional seal on flat, corrugated and sturdily structured roof and walled areas
g One-sided self-adhesive sealing strips made from
profiled and color-coated aluminium or profiled
copper (has cleaning effect similar to our Roof
Recovery product)
g Adhesive surface made from butyl adhesive,
covered with tearproof overlapping synthetic film
g Watertight and uV-resistant metal surface
g no risk of injury
Folded aluminium sheet on both sides.
g Quick and easy to use off the roll
g Adaptation to subsurfaces is carried out easily and
with contour precision
Saddle washer
Range of application:
Connection and waterproofing works on chimneys, walls
and other rising building elements with good optics.
Processing instructions:
When gluing to surfaces ensure they are dry and free
of dust and dirt. Use scissors to cut R Flex to required
lengths. Partially peel away the protective film and
mould the material roughly to the subsurface.
users:
Sanitary and heating installation engineers, roofers and
Metal workers
Press down on the R Flex. After fixing this in place
continue to peel away the protective film and continue
to press down on the material. For optimal adhesion
use the BTI Contact Roller (Item number 016739).
After gluing in place, fix the upper edge with a standard
coping strip and seal using a duroelastic sealing
material such as silicon neutral (see Chapter 08A).
It is not recommended that you use this product at
temperatues below +5 °C or on damp subsurfaces.
You can lay pieces of R Flex on top of each other. Use
a BTI Contact Roller to press down on the adhesion in
the corner area. Use BTI Multi Primer on highly porous
subsurfaces.
technical data
Material thickness approx. 2 mm
Aluminium thickness approx. 0.15 mm
Usage temperature +5 °C to +35 °C
Temperature stability -30 °C to +85 °C
Adhesive material butyl
Width 280 mm
Store at max. +30 °C for 9 months
in its original packaging
item unit Designation Roll Roll color
number m length m width mm
019593 10 R-Flex 5 280 brick red
019594 10 R-Flex 5 280 brown
019595 10 R-Flex 5 280 anthracite
019596 10 R-Flex 5 280 copper
03-133 A/P/T 03