02 - BTI - We know your business

www.bTI-group.CoM
60
b
�����
Drilling and cutting oil
A thread cutting product made from a mineral oil base; universal use for drilling and cutting tools
g For all alloy and rust-free steels, painted
metals and aluminum
g Extends the product life of tools
g Improves the dimensional tolerance and
surface condition
g Improves protection against corrosion
g Does not contain chlorine or pCb/pCT
g performs in cold temperatures up to -15 °C
g good lubricating effect
g physiologically harmless
g Is not aggressive compared with composite
metals, compatible with synthetics
Ecopress
The refillable can without propellants
g Max. fill quantity = 350 ml
g Can be refilled with compressed air
(min. 5 bar, max. 8 bar)
g Ecopress comes with a spot jet sprayhead
g Fill using the air valve on the floor with only clean,
dry and oil-free compressed air, hold the can off
the ground
g only use with suitable pressure reducers
(item number 002466) – pay attention to the
manometer display!
range of application:
BTI drilling and cutting oil is used undiluted to cut
threads on pipes that do not come into contact with
drinking water.
processing instructions:
Apply BTI drilling and cutting oil to the elements,
drills and thread cutting tools that you wish to treat.
Item unit Container Contents
number pieces l
019728 1 canister 5
08-503 A/P 08503AB
Important Information:
When opening the can it must not be under pressure;
before opening the nozzle cap, hold the can off the
ground and press down on the spray head or the air
valve.
Accessories:
Area jet sprayhead for use on large areas; filling station
for quick and easy filling of cans, comes with a mounting
kit.
Item unit Designation Container Volume
number pieces ml
012101 1 Ecopress spray can 350
012409 10 Area jet sprayhead – –
012151 1 Ecopress filling station – –
08-508 P/A 08508AB
pressure sprayer
g Synthetic pressure sprayer for goods sold by the
liter
g pumping causes pressure to build up in the fluid
container
g pressing down on the spray button is enough to
ensure even and constant atomization
g The safety splash valve can be easily replaced with
a spot jet or area jet
g Max. fill quantity: 0.75 l, operating pressure: 3 bar
g Ventilate after use
Atomizer set:
g Synthetic hand sprayer for goods sold by the liter
g The safety splash valve can be easily replaced with
a spot jet or area jet
Item unit Container Volume
number pieces l
385018 1 Pressure sprayer 1
203467 1 Atomizer set 0,5
436062 1 Plastic run off tap*
000279 1 Plastic run off tap**
08-508 A/P 08508AA
plastic run off tap:
* suitable for wood lubricants, leak finders,
rost protectors and rost dissolvers
** suitable for DVGW thread cutters, drilling
and cutting oils
The details specified in this publication are based on our current knowledge and experience. The consumer is responsible for carrying out his or her own personal checks and tests when using our products to ensure that they are suitable
850 for use in the particular environment. The information contained within this publication does not infer a legally binding assurance of the specific properties or the suitability for a precise intended use.
1006