02 - BTI - We know your business

WWW.BTI-GROUP.COM
05
B
Examples of application:
Wooden substructure Wall cladding
�����
Installation of plastic windows Installation of wooden windows
Installation of doors Installation is concealed under lock plate and sealing lip
strength of the
fixing element
distance depth of the anchorage
range
Note on installation:
1. Formula to determine the length of the screw:
thickness of profile
+ distance range
+ length of dowel
+ 5 mm
= Mimimum length of screw
Plastic windows
toptec ®
20
For suspensions from walls and ceilings
toptec ®
45 plus
Fixing distance for frames up to 40 mm in the profile
toptec ®
50 plus
Fixing distance for frames of 41 mm onwards in the
profile
4W-toptec ®
45/11.5 plus
High endurance owing to the reinforcement along the
diameter of the screw
244 required.
1006
top
50/10
plus
®
41 cm onwards
in the profile
2. Pre-drill the window frame at the points where it would be fixed. diameter of the bore should match prefectly
with the profile
toptec 6/10 Wood 8 mm dowel dia. 8 mm
Alu/Plastic 8 – 9.5 mm
4W-toptec 7/11.5 Wood 9.5 mm dowel dia. 10 mm
Alu/Plastic 10 – 10.5 mm
typically these are standard values. Owing to the wide variety of profiles it is safer to execute trial drills in advance
3. Place the frame in the opening designed for the window and align it.
4. bore out the holes for the dowels through the bores of 8 or 10 mm dia. drilled in the frame.
5. select the dowel according to the foundation and hammer it in using the appropriate screw and applying the
efficient plug-through assembly method.
6. using the electric screw driver screw the toptec-screws in flush with the surface and install the cover caps if