02 - BTI - We know your business

1006
Attention:
Assembly clips for fixing the clamping pads must be
ordered separately!
Size I
Size II
�����
Fixed point type A with joint support
1 U-steel and 2 clamping pads
Design/Assembly:
g Simple assembly by screw fixing to the structure
g Can be used up to a maximum fixing distance of
0.5 m (see picture)
g The fixing distance can be changed before
assembly using the joint support
g A base coat is recommended after welding to the
fixed point substructure by the customer
For assembly, the following is also required:
a) 2 x joint supports with board
b) 2 x profile rails 45/40/3 fbv, L = 420 mm
c) 8 x hex screws M12 x 25
d) 4 x 2-hole thread board M12
e) 8 x U-shims
Pipe Material U-steel Max. axial weight Item
outer dia. pipe clamp length x width reaction force kg/piece number
mm mm mm kN
21.3 2 x 25 x 3.0 40 x 35 8.50 2.500 017155
26.9 2 x 25 x 3.0 40 x 35 8.50 2.522 017156
33.7 2 x 25 x 3.0 40 x 35 8.50 2.538 017157
42.4 2 x 25 x 3.0 50 x 38 8.50 2.700 017158
48.3 2 x 25 x 3.0 50 x 38 8.50 2.711 017159
57.0 2 x 25 x 3.0 50 x 38 8.50 2.900 017160
60.3 1 x 50 x 5.0 50 x 38 8.50 3.400 017161
76.1 2 x 50 x 5.0 65 x 42 15.0 6.400 017162
88.9 2 x 50 x 5.0 65 x 42 15.0 6.610 017163
108.0 2 x 50 x 5.0 65 x 42 15.0 6.810 017164
114.3 2 x 50 x 5.0 65 x 42 15.0 7.220 017165
133.0 2 x 50 x 5.0 80 x 45 15.0 7.500 017166
139.7 2 x 50 x 5.0 80 x 45 15.0 7.700 017167
159.0 2 x 50 x 5.0 80 x 45 15.0 7.900 017168
The products listed on these page are not in storage; they have a
delivery time of around 10 days
Technical data:
g Material S235JR, uncoated
g Noise protection for DIN 4109
g Noise-insulation profile:
Material Rubber EPDM/SBR
Temperature resistance: -40 °c to +120 °c
Material thickness refer to table
Building material class acc. to DIN 4102 B2
can be delivered with silicone noise-insulation insert and in other sizes on
request!
www.BTI-GROUP.COM
07
C
519