02 - BTI - We know your business

www.BTI-GROUP.COM
07
C
Attention:
Assembly clips for fixing the clamping pads must be
ordered separately!
With 45° anchoring, observe at least
15 mm distance
�����
Fixed point
Structure-borne insulated
With 45° anchoring, observe at least
15 mm distance
Type A Type B
Pipelines that are subjected to expansion along their length due to heat or cold are equipped with compensators or
expansion bends. To avoid damage to the construction or to the compensators, fixed points must be installed that
limit the pipe distances to be compensated. Large forces may thereby occur.
The total fixed point load when using compensators – taking into account the cross‑sectional surface of the
sheathing and the axial resistance value of the sheathing – depends on the pressure, the temperature and the pipe
length between the compensator and the fixed point DIN 4109 stipulates among other things that pipe installations
in high‑risers must be laid with structure‑borne insulation. This applies to BTI fixed points.
Design/Assembly:
g Structure-bornde insulated fixed point, welded in a stable design and that accepts high pressure forces; due
to the construction, all metal connections between the pipeline and the structure are prevented
g Simple, time-saving assembly
g Multiple range of possibilities for attaching to structure and pipeline
g A base coat is recommended after welding to the fixed point substructure by the customer
Technical data:
g Material S235JR, uncoated
g Noise-insulation profile:
Material: Rubber EPDM/SBR SILICONE
Temperature resistance - 40 °c to +120 °c - 60 °c to +250 °c
Material thickness refer to table refer to table
Building material class acc. to DIN 4102 B2 B2
D U- S Material L1 L2 h HA HB B Rubber Rubber Screws weights
Pipe Steel mm thickness mm mm mm mm mm mm clip pressure Type A Type B
dia. mm mm mm pieces kg kg
mm mm
21.3 40/35 2 x 25 3 100 96 43 60 92 92 6 10 M 8 1.6 2.8
26.9 40/35 2 x 25 3 100 96 43 70 97 94 6 10 M 8 1.6 2.8
33.7 40/35 2 x 25 3 100 96 43 78 104 103 6 10 M 8 1.6 2.9
42.4 50/38 2 x 25 3 100 96 43 88 114 109 6 10 M 8 1.8 3.0
48.3 50/38 2 x 25 3 100 96 43 95 122 118 6 10 M 8 1.8 3.1
57.0 50/38 2 x 25 3 100 96 43 105 135 124 6 10 M 8 2.0 3.5
60.3 50/38 1 x 50 5 140 96 43 114 142 148 6 10 M12 2.5 4.0
76.1 65/42 2 x 50 5 200 126 63 138 173 168 10 10 M12 5.5 8.5
88.9 65/42 2 x 50 5 200 126 63 154 190 182 10 10 M12 5.7 8.8
108.0 65/42 2 x 50 5 200 126 63 173 208 261 10 10 M12 5.9 9.2
14.3 65/42 2 x 50 5 200 126 63 180 216 214 10 10 M12 6.3 9.5
133.0 80/45 2 x 50 5 200 126 63 199 239 233 10 10 M12 6.6 10.0
139.7 80/45 2 x 50 5 200 126 63 206 248 240 10 10 M12 6.8 10.3
159.0 80/45 2 x 50 5 200 126 63 229 269 259 10 10 M12 7.0 10.5
168.3 120/55 2 x 50 5 330 126 63 – 278 267 10 10 M12 – 18.0
219.0 120/55 2 x 50 5 330 126 63 – 335 349 10 10 M12 – 19.0
273.0 120/55 2 x 50 5 330 126 63 – 389 403 10 10 M12 – 19.8
323.9 120/55 2 x 50 5 330 126 63 – 440 454 10 10 M12 – 20.6
516 355.6 120/55 2 x 50 5 330 126 63 – 472 486 10 10 M12 – 21.0
1006