02 - BTI - We know your business

1006
FIRE PROTECTION
�����
Fire protection plug Dobo bDS
For S 30 – S 90 wall and ceiling ducts of cables acc. to DIN 4102, part 9
g Especially suitable for often changing
electric installations
g Very economical due to short installation period
g Free of dust and fiber
Suitable for dust and fiber sensitive rooms
g The TS 90 fire protection compound can be used
for sealing any gaps and joints
g Shelf life: 12 months at +20 C
The “general planning permission” must be observed
for secure application of the fire break in compliance
with the permission. general planning permission for
the fire break: Z-19.15-1318
Application areas:
Especially suitable for light separating walls in beamand-column
construction with steel sub-construction
Minimum component
length:
Light separating wall:
S 30 = 7.5 cm
S 90 = 10.0 cm
Minimum bulkhead
strength:
Light separating wall:
S 30 = 10 cm
S 90 = 10 cm
Processing instructions:
Aperture with multi-cut hole saw, dia. 74 mm or HSS
cylinder saw, dia. 76 mm drill; clean component
aperture; insert cables; slot jacket of the DoBo BDS fire
protection plug around the cable in the component
aperture; the joint between the jacket and the
component aperture must be filled in with plaster
spatula or TS 90 fire protection compound on both sides
(minimum depth: 2 cm); plug cut with a knife
depending on cable width insert one pressed plug from
either side in the previously inserted jacket; seal joints
and gussets with TS 90 fire protection compound
(minimum depth: 2 cm
Item Unit Designation Outer dia. Length Rec.
number Pieces mm mm drill dia.
mm
013650 5 Fire protection plug DoBo BDS 75 100 74 – 80
011626 1/12 Fire protection plug TS 90 310 ml
011627 10 Designation plate TS 90/BDS 90
08-901 A/P 08901AB
The details specified in this publication are based on our current knowledge and experience. Due to the abundance of possible processing and application influences this information does not release the processor from performing his
own tests and trials. Legally binding assurance of certain characteristics or suitability for a concrete implementation objective can not be derived from this information.
WWW.bTI-gROUP.COM
08
C
621