02 - BTI - We know your business

1006
�����
Cutting off and rough grinding wheel
The right tool for every purpose and almost all materials
� High quality raw materials and the most up to date
manufacturing technology
� High cutting performance and long working life
� Safety tested
All cutting and rough grinding wheels conform with
EN 12413 and carry the oSa quality mark (organisation
for the Safety of sanding tools (registered
association)
� Straight or cropped design
Processing instructions:
� Cutting wheels are not permitted for lateral grinding
(rough grinding)
� Ensure that rough grinding wheels are used at the
correct working angle (approx. 35°)
Straight design Cropped design
bSX TurboCut No Limit
Extra thin high-performance cutting wheel of the best quality with long working life
� Very high cutting speed and long working life
� Precise and almost completely clean cutting with
thin clearance
� Low risk of breakage
� Reduced flying sparks or limited accumulation of
dust
bSX TurboCut
Extra thin high-performance cutting wheel with excellent performance values
� Very high cutting speed
� Precise and almost completely clean cutting with
thin cutting gap
� High risk of breakage
bSX
� Do not exert strong pressure when using cutting
wheels but rather work with the machine's own
weight
Increased pressure does not produce any significant
improvement in results, but rather causes increased
abrasion
� Do not tilt or cant or jam cutting wheels
Risk of breakage
� Ensure that you use the correct number of revolutions
per minute in accordance with manufacturer
recommendations, do not insert worn out cutting
wheels on machines with smaller diameters
� Wear protective glasses and earing protection
� In the case of thin cutting wheels (≤ 1 mm) you
may have to use the paper insert ring provided
Check that the angle grinder bolt is secured
� Cool cutting for reduced thermal discoloration
of material, therefore also suitable for painted
surfaces
� Reduced flying sparks or limited accumulation of
dust
� Also suitable for painted surfaces
Cool cutting for reduced thermal discoloration of
material
High-performance cutting and rough grinding wheels with very good performance values
� High cutting performance and longest working life
basic
High performance quality that has been tried and tested millions of times
� Solid cutting performance and long working life
� Very good resistance to breakage and lateral load
capacity
� Very good resistance to breakage and lateral load
capacity
WWW.bTI-GRoUP.Com
04
F
207