02 - BTI - We know your business

1006
�����
toptec ®
distance screw
The distance screw for stress-free installation of wooden windows, aluminum and plastic windows
as well as doors
g Lateral spacer blocks and supporting blocks are not
required any more. Supporting blocks are required
only for dissipating the dead load (bottom)
the time-consuming work of balancing may be
done away with; time required for installation is
reduced by 40-60%; no constraints when installing
tapes, ideal for state-of-the-art installations (RAlinstallation).
g Is used in all construction materials, the choice of
dowels being flexible
Can be screwed directly into wood, for assembling
with Nylon-dowel b8/b10 or tubular dowel b8 H-
80 or b10 H-90, insulation of the dowel improves
sound insulation and gives better protection against
corrosion
g Transition from the distance shaft to the retaining
threads without the need for a connection piece
Quickly holds onto the material, even if it is screwed
in at an angle.
Windows fastened with toptec ®
–
pre-drilled windows 8 and 10 mm
g Impact-protected deep internal serrations TX 25
or in case of 4W-toptec 45/11.5 TX 30
High tightening torques, easy single-handed
installation
g Special slideway coating
Improved values of tightening torque
g Distinct screw tip
Precise positioning and easy screwing,
when anchoring the dowel the guide-ways in the
dowel are supported
g Combi-threads, which combine the advantages
of the wooden threads and the chipboard screw
threads
Excellent straddling properties in nylon dowels and
very good tightening torque in all types of wood
toptec plus:
g Screw made of hardened steel
g 50% higher breaking torque
g Can be screwed easily into the double-walled
window profiles with steel cores
g Thread gets cut in the steel cores
Can be screwed and unscrewed repeatedly
g No distortions in the frame
g Tested quality
Test report no. 509 213 76/1
Test report no. 509 213 76/2
Test report no. 509 213 76/3
Test report no. 509,231 03/1
Test report No. 211 224 29
g Installation is concealed under a rubber seal or a
lock plate
g Combi-threads
Ideal for renovation of old buildings, installation of
skylight and dormer windows
g The thread pitch is the same as that of the
retaining thread or the anchoring thread
No bracing or interlocking, which means no
postprocessing is required
g Tension-free installation
No subsequent setting of the wing is necessary;
thermal movement of the window is possible with
the help of a suitable dowel
g quick and easy loosening of the screw for
corrections
g toptec 45 or 50 screws have special 45 or 50 mm
long retaining threads
Grips securely onto cases of any dimensions
Range of application:
g toptec 20/8 mini plus for installations concealed
under a rubber seal or a covering strip
g toptec 45/10 plus for frames with fixing distance
up to 40 mm in profile
g toptec 45/11.5 plus for frames with steel cords
of thickness up to 3 mm and fixing distance up to
40 mm in profile
Anti-burglary system in compliance with resistance
class 2, a component of the 4W-system
g toptec 50/10 plus for frames with fixing distance
from 41 mm onwards in the profile
WWW.BTI-GROUP.COM
05
B
243