02 - BTI - We know your business

1006
�
�
BONDING + SEALING
�
�����
Applicator gun SP2
For all 1K installation foams with M65 thread adapter
g Long life cycle
The entire can system is constructed of precisionmade
metal parts
g Low weight
Body made entirely from high grade plastic
g No agglutination in the adapter
A Teflon film of the adapter prevents foam residue
from sticking inside the adapter
g Controlled production
The foam egression amount is measured with the
trigger, via a set screw the maximum egression
amount can be limited and thus an even application
ensured
g No maintenance
The gun is designed so the material driving parts do
not need to be cleaned
Exchange gun
Range of application:
To process any standard gun foams which have an M65
thread adapter ring
Processing instructions:
Never store an operated gun without screwed-on foam
can. The system must always be filled to the nozzle with
foam.
Never clean the adapter with a hard object, as antiadhesion
coating will be damaged. Observe the
operating manual.
Item Unit Designation
number Pieces
017395 1 Applicator gun SP2
Acquisition of an exchange gun only possible on presentation of a defect applicator foam gun in need of repair
without screwed-on foam can
Accessories
Spare parts for guns
08-653
Item Unit Designation Fig.
number Pieces no.
307564 1 SP2 Pageris exchange gun �
08-653 A/P 08656AB
Item Unit Designation Fig.
number Pieces no.
118362 1 Trigger for SP2 �
263303 1 Adapter for SP2 �
005585 1 Adapter for SP3 –
007624 1 Spare parts set 1 for SP1 –
(5 plastic sealants for needle, 5 nozzles, 2 small plastic pipes)
007626 1 Spare parts set 2 for SP1 –
(1 distance pipe incl. nozzle, 1 adapter)
08-654 A/P 08654
WWW.bTI-gROUP.COM
08
A
585