07.01.2013 Views

02 - BTI - We know your business

02 - BTI - We know your business

02 - BTI - We know your business

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

1006<br />

The details specified in this publication are based on our current <strong>know</strong>ledge<br />

and experience. The consumer is responsible for carrying out his or<br />

her own personal checks and tests when using our products to ensure that<br />

they are suitable for use in the particular environment. The information<br />

contained within this publication does not infer a legally binding assurance<br />

of the specific properties or the suitability for a precise intended use.<br />

internal<br />

�����<br />

Diffusion tape EPDM<br />

use to seal mechanically strong loaded joints on windows, doors, metal and facade constructions<br />

g Water vapor porous EPDM tape with self-adhesive<br />

fixing strips<br />

g combines well with 4W-internal or Alu tape<br />

g no laborious welding required as is the case with<br />

bitumen strips<br />

Easy to use with the 4W-Adhesive. The fluid<br />

adhesive systems (on bitumen, for example, Roof<br />

Supraflex) ensure no soiling of building elements.<br />

g tread resistance<br />

Maximum elongation at break 590 %.<br />

Range of application:<br />

Used for vapor porous sealing of connection joints in external<br />

areas such as house, balcony and terrace doors,<br />

window elements in socket areas, facade elements and<br />

conservatories.<br />

Processing instructions:<br />

Subsurfaces must be clean, dry, sturdy,<br />

and free of grease, oil and other anti-adhesive elements.<br />

Unwind the Diffusion tape EPDM and cut including<br />

minimum 5cm excess. Remove masking paper from<br />

adhesive strip, press fixing strips carefully onto frames<br />

or backs of the building elements on all sides that need<br />

to be sealed. Use to use 4W-Adhesive to glue the embrasure<br />

and socket sides, and Roof Supraflex to glue to<br />

all subsurfaces that contain bitumen.<br />

Sealing flat strip<br />

g Optical high quality solution for old buildings<br />

g no need to use a backfill band<br />

Practical sealing bridge<br />

g Quick and clean sealing of joints between plaster<br />

and door/window frames<br />

g Vapor diffusionproof<br />

Use <strong>BTI</strong> sealing materials to easily fill in joints.<br />

g Protective film allows you to work in a clean<br />

manner<br />

g Easy to use with bti Mitre Shears Profi 85<br />

g Flat, unobtrusive covering of joints of different<br />

widths<br />

Range of application:<br />

Used for vapor diffusionproof sealing of connection<br />

joints in internal areas.<br />

Processing instructions:<br />

Subsurfaces must be clean, dry and free of dust and<br />

grease. Clean subsurfaces with <strong>BTI</strong> PVC Cleaner.<br />

You must allow the cleaner to evaporate and remove<br />

any occurring evaporation moisture. Fit the strip and<br />

cut off accordingly. Attention: Maintain an extension<br />

joint (approx. 0.5 – 1 mm), do not clamp the strip!<br />

technical data<br />

Adhesive material butyl rubber<br />

Length EPDM<br />

Material thickness 0.75 mm<br />

Max. tensile strength 12.4 N/mm²<br />

Max. elong. at break 590 %<br />

Building materials class B2<br />

Water vapor porous resistance level 31,000 µ<br />

Water vapor porous equivalents<br />

Air layer thickness Sd value 23 m<br />

Usage temperature +1 °C to +35 °C<br />

Temperature stability -40 °C to +100 °C<br />

Store at max. +30 °C 9 months<br />

in its original packaging<br />

item unit Roll Roll<br />

number m length m width mm<br />

<strong>02</strong>0097 20 20 150<br />

<strong>02</strong>0098 20 20 200<br />

<strong>02</strong>0099 20 20 250<br />

<strong>02</strong>0100 20 20 300<br />

03-160<br />

Self-adhesive synthetic installation strip used to seal connection joints in internal areas<br />

Remove approx. 10 – 20 cm of the protective film from<br />

the adhesive tape. Position and align the strip (leaving<br />

approx. 1 mm distance from the plaster/masonry).<br />

Remove the remaining protective film from between<br />

the area you are gluing to and the strip, and apply<br />

equal firm pressure to the adhesive bond. Use <strong>BTI</strong> Seal<br />

MS-P or Diskit to fill in the resulting movement joint,<br />

thereby applying an air and vapor diffusionproof seal.<br />

The width of the joint will be determined by the strip.<br />

No need to use a backfill band.<br />

Scope of Delivery:<br />

10 x 6m strips in film tubing<br />

item unit Designation Strip Width b Height<br />

number m length m mm mm<br />

00<strong>02</strong>32 60 Sealing flat strip 30 6 20 2.5<br />

00<strong>02</strong>34 60 Sealing flat strip 40 6 30 2.5<br />

03-170<br />

technical data<br />

Material very light, impact-resistant hard PVC<br />

Sealing bridge soft PVC<br />

Adhesive strips foam adhesive tape<br />

Color white<br />

Usage temperature +5 °C to +35 °C<br />

Temperature stability -40 °C to +70 °C<br />

Storage 9 months<br />

WWW.bti-gROuP.cOM<br />

03<br />

89

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!