02 - BTI - We know your business

1006
�����
Zinc spray light
Highest corrosion protection with long-term effects
g protects hot dip galvanized surfaces from
corrosion after drilling, welding or lubricating
Extremely high drying and adhesive power, special
composition with high zinc content.
g Components can be further processed without
difficulty
Can be lacquered and lubricated over, heat-resistant
up to minimum +650 °C, abrasionproof and
weather-resistant
g Any repairs carried out later can be visually
adjusted
The color tone is adjusted to the galvanizing
range of application:
Can be used on hot dip galvanized surfaces after
drilling, wrought iron or welding work; can be used
indoors and outdoors; heavily stressed surfaces;
steel consructions, wrought iron parts, guard rails
as well as heating and ventilations shafts.
paint-on zinc
paint-on corrosion protection with long-term effects
g used as a primer and cold galvanising compound
on highly stressed metal constructions
Protects hot dip galvanized surfaces from corrosion
after drilling, welding or lubricating work
g Components can be further processed without
difficulty
Can be lacquered and lubricated over, heat-resistant
up to minimum +400 °C, abrasionproof and
weather-resistant
g Any repairs carried out later can be visually
adjusted
The color tone is adjusted to the galvanising
range of application:
Can be used on hot dip galvanized surfaces after
drilling, wrought iron or welding work; can be used
indoors and outdoors; suitable for heavily stressed
surfaces; steel consructions, wrought iron parts,
fencing, guard rails as well as heating and ventilations
shafts.
processing instructions:
Clean and dry all surfaces well, removing any grease
and dirt using BTI Metal Cleaner (item number 015596
for example. Shake well before use and apply evenly.
processing instructions:
Clean and dry surfaces well. Remove any grease
and dirt using the BTI Metal Cleaner for example
(item number 015596). Shake the can well for
about 2 minutes. Spray the Light Zinc Spray evenly.
After use, spray the spray valve freely up in the air.
Technical data
Heat resistance up to +650 °C
Coating abrasionproof
Dustproof 5 – 10 min
Non-slip 10 – 30 min
Can be lacquered over 6 – 8 h
Item unit Container Contents
number pieces ml
015968 6 spray can 300
The details specified in this publication are based on our current knowledge and experience. The consumer is responsible for carrying out his or her own personal checks and tests when using our products to ensure that they are suitable
for use in the particular environment. The information contained within this publication does not infer a legally binding assurance of the specific properties or the suitability for a precise intended use.
08-518
Technical data
Heat resistance up to +400 °C
Coating abrasionproof
Drying time approx. 30 minutes
Hardening time approx. 10 – 12 hours
Can be lacquered over approx. 10 – 12 hours
Usage temperature +18 °C to +25 °C
Item unit Designation Cont. Cts.
number pieces ml
016033 1/ 6 Paint-on zinc can 375
016034 1/10 Brush 50 mm
08-518 A/P/T 08
www.bTI-group.CoM
60
b
855