02 - BTI - We know your business

WWW.BTI-GrOuP.COM
02
B
European Technical Approval –
Option 1 for cracked concrete
Z-21.1-1
Z-21.1-1 0
Monitored
Technical data:
Approved by the
DIBT for single
fixings draw and
pressure zone
ETA 05/0011
** Additional technical data is
contained in the approval documents
�����
Multi-Monti screw anchor stainless steel A
Functioning tip made of hardened steel
g Material: stainless steel A (1. 01)
g Functioning tip phosphated
g Easy and fast assembly
Minimum anchoring depth, no drilling diameter,
machine-worked, time reduction in assembly of up
to 50 %
g Approved by building authorities/fire-protection
tested**
Please observe the approval documents!
Approved for light ceiling coverings, single approval
for pressure zone; single approval for draw zone;
fire-protection tested F 120
g A multitude of possible applications
Different diameters and clamping strengths; high
holding values even in case of small axle and edge
distances; positive fit, low splay-pressure anchoring
on exterior surfaces for which no borehole sealing is
mandatory
requirement for approval of underground:
Concrete ≥ C20/25 ≤ C50/60
Multi-Monti hexagon head stainless steel A
Additional undergrounds suitable for fixing to:
Natural stone, solid brick
Main users:
Electrical, heating and sanitary trades, metal work, civil
engineering, production of prefabricated houses
Areas of application MMS dia. . :
g Lightweight facade substructures
g Fixing of fire-protection coverings on concrete
g Subordinate constructions in exterior surfaces
Area of application MMS dia. 10/12:
g Fixing of stairs and balustrades, facade
construction, signs and bil boards, etc.
g All fixings on exterior surfaces for which no
borehole sealing is mandatory
The Multi-Monti in stainless steel is equipped with a functional tip made of hardened stainless steel.
This functional tip can not be counted towards the insertion depth. The stainless steel screw anchor must therefore
be inserted deeper by the length of the functional tip.
Total length Ltotal = length (mm) + functional tip
Item unit Designation A/f Clamping Drill dia.
number Pieces Dim. dia. x length mm mm strength tfix mm mm
012112 * 100 MMS-S 7.5 x 50/ 65 A4 13 10 6
012113 * 100 MMS-S 7.5 x 60/ 75 A4 13 20 6
012114 ** 50 MMS-S 10.0 x 70/ 85 A4 16 10 8
012115 ** 50 MMS-S 10.0 x 80/ 95 A4 16 20 8
012116 ** 25 MMS-S 12.0 x 80/100 A4 18 10 10
012117 ** 25 MMS-S 12.0 x 100/120 A4 18 30 10
02-810 * DIBT approval no. Z-21.1-1697; ** DIBT approval no. Z-21.1-1701 A/P/T 02810
a/f
Different fastening thicknesses
are permitted
1006