02 - BTI - We know your business

1006
BONDING + SEALING
The details specified in this publication are based on our current knowledge
and experience. Due to the abundance of possible processing and application
influences this information does not release the processor from performing
his own tests and trials. Legally binding assurance of certain characteristics
or suitability for a concrete implementation objective can not be derived from
this information.
�����
Sealing compound Fire kit
Heat-resistant sealing compound for sodium silicate basis
g Suitable for extreme thermal strains
Heat-resistant up to +1,500 °C
g Free from asbestos
Range of application:
To seal, install and repair ovens, central heating,
slow-combustion stoves and various constructions
in concrete, masonry or metal which must resist
very high temperatures
Processing instructions:
When gluing to surfaces ensure they are clean and
free of grease, oil and rust. Slight moisturizing
is recommended for absorbent surfaces. Sealing
compounds can be smoothed with a spatula. Tools can
be cleaned immediately after use with water. Gradual
warming up 12 hours after use prevents formation of
bubbles. Carrying out an adhesion test on every surface
is recommended.
Technical data
(bei +20 °C/55 % relative humidity)
Item Unit Color Container Cont.
number Pieses ml
309540 1/12 anthracite cartridge 310
High temperature silicone sealing compound
Curing approx. 1 – 2 days
(depends heavily on temperature)
Specific weight 1.82 g/cm³
Volume reduction 0%
Joint width min. 5 mm/max. 15 mm
Usage temperature +5 °C to +30 °C
Temperature stability -20 °C to +1,500 °C
Shelf life at +20 °C 12 months in sealed containers
(store frost safe)
08-125 A/P/T 08125
High grade, heat-resistant sealing compound on silicone basis with temperature resistance of up to +260 °C
g Very suitable for heat strained sealing joints
Temperature-resistant up to temperatures up to
+260 °C,
short-term up to +300 °C
g Very good durability
UV-resistant, weatherproof, waterproof and
color-fast
Range of application:
Sealing of e.g. smoke tube connections; joints with high
thermal strain
Processing instructions:
When gluing to surfaces ensure they are clean, dry,
stable and free of grease. Pre-treat porous and soft
surfaces with S400 primer. Smooth joints with BTI
smoothing agent (item no. 001880). It is recommended
that an adhesion test be carried out on every surface,
tools can be cleaned with spirit after use.
Technical data
Skin building time approx. 15 min
Curing 1.5 mm/24 hrs
Shore A hardness 29
Joint width min. 2 mm
Usage temperature +5 °C to +40 °C
Temperature stability -60 °C to +260 °C
short-term up to +300 °C
Shelf life at +20 °C 18 months in sealed containers
Item Unit color Container Cont.
number Pieses ml
013762 1/12 red cartridge 310
08-149 A/P/T 08149 AA
WWW.bTI-gROUP.COM
08
A
563