02 - BTI - We know your business

1006
BONDING + SEALING
�����
Technical data
(at +20 °C/55 % relative air humidity)
Universal wood adhesive D2 Installation adhesive D3
Color beige, mi ky transparent drying white, transparent drying
Viscosity 13,000 ±2,000 mPas 13,000 ±2,000 mPa . s
Density 1.30 g/cm3 1.10 g/cm3 Ph value approx. 5 without hardener approx. 3
Illuminant +5 °C +5 °C
Open time approx. 10 min approx. 6 – 10 min
Pot time – with illuminant approx. 24 h
Forming pressure – –
Joint adhesion +20 °C approx. 6 – 12 min +20 °C approx. 15 min
Joint adhesion +80 °C approx. 2 – 5 min +50 °C approx. 5 min
pre-heated – +80 °C approx. 2 min
Surface adhesion +20 °C approx. 20 – 25 min +20 °C approx. 15 – 2 min
(HPL boards) +50 °C approx. 8 – 10 min +50 °C approx. 5 min
Corpus adhesion +20 °C approx. 10 – 12 min –
Veneer adhesion +20 °C approx. 12 – 15 min –
+80 °C approx. 3 – 5 min –
Surface adhesion – +80 °C approx. 1 – 2 min
Quantity applied 100 – 150 g/m 2 (automatic) 120 – 200 g/m 2
150 – 200 g/m 2 (hand adhesion tools) –
Shelf life in originally sealed container approx. 1 year. The adhesion is frost-resistant for 12 months up to -30 °C.
at +20 °C Carefully warm up to room temperature and stir well before use.
Note: When using power hardener the times are increased by about 50%
Easy hand pump
For adhesives in buckets and other tough liquids
g Universally applicable hand pump for containers
of 35 – 45 cm in height
g Fast and clean extraction, no agglutinating and
drying up
g Extraction quantity can be precisely dosed
g With the help of the adapter (accessories) and a
battery-charged screwdriver larger vessels can be
filled quickly
The practical adhesive dispenser
Item Unit Container Content
number Pieces l
436429 1 dispenser can 0.9
08-310 A/P 08310AE
Range of application:
1. drill or cut 35-mm hole in the top. Make 1-mm drill
for ventilation next to it.
2. Fix top between both nuts depending on container
height. The conveyor tube should reach to the bottom
of the container.
3. Repeating turning clockwise fills the conveyor
system. After extraction the nozzle-spout must be
locked so the pump does not dry up.
4. After complete emptying of the container, put the top
on a full container using the easy hand pump.
Item Unit Designation
number Pieces
001958 1 Easy hand pump
for 10-kg container
001959 1 Easy hand pump
for 30-kg container
08-310 A/P 08310AB
The details specified in this publication are based on our current knowledge and experience. Due to the abundance of possible processing and application influences this information does not release the processor from performing his
own tests and trials. Legally binding assurance of certain characteristics or suitability for a concrete implementation objective can not be derived from this information.
WWW.bTI-gROUP.COM
08
b
593