02 - BTI - We know your business

WWW.bTi-gRouP.coM
03
�����
Ridge cover FgR-P
The functional ridge and hip roll for long-lasting ventilation
g Two-part design made from modified PVc and
lacquered aluminium
g Age-resistant
g Provides optimal ventilation in accordance with
DiN 4108
g Ventilation cross section: approx. 210 cm² per
running metre
Material Features:
g The combination of modified PVc and strong metal
tape offers secure protection against uV, ozone
and other environmental conditions
g Lacquered aluminium, underside coated with
protective lacquer
g Adhesive strips made from gray butyl adhesive
with peelable protective film
g Temperature stability from -30 °c to +80 °c
Processing instructions:
Use at +5 °C to +35 °C. The subsurface must be dry
and free of dust, dirt, oil and grease. Roll out onto the
ridge batten, straighten and tack firmly into place.
Remove the adhesive guard. Mould the aluminium
tapes onto the roof covering and continue to press down
firmly. Do not lay under tension.
item unit Designation Roll Roll color
number m length m width mm
013986 20 Ridge cover FGR-P 220 r 10 220 brick red
013987 20 Ridge cover FGR-P 220 b 10 220 brown
013988 20 Ridge cover FGR-P 220 a 10 220 anthracite
013409 20 Ridge cover FGR-P 300 r 10 300 brick red
013410 20 Ridge cover FGR-P 300 b 10 300 brown
013412 20 Ridge cover FGR-P 300 a 10 300 anthracite
03-104 A/P/T 03104
Ventilation cap
All-purpose ridge and hip ventilation element that is ideal during cold periods
g optimal snow protection and roof waterproofing
Thick roof slats cannot be damaged by small
animals or used by birds to nest in.
g Also easy and safe to use during unfavorable
weather conditions
The very high quality synthetic material can be used
in all weathers. The practically designed overlap
ensures that the material is laid safely and quickly.
g best possible air circulation and protection
against condensation
Raised gap edges promote the chimney effect and
prevent the entry of condensation.
g Excellent conformance on the most common clay
and concrete roofing tiles
The high quality UV-stabilized and extremely flexible
material fits all curvatures.
Range of application:
For use with popular clay and concrete roofing tiles.
Processing instructions:
Lay the element centrally on the ridge and hip batten
and secure it in place with nails, screws or tacks.
Overlap the elements (approx. 3 cm) by fitting into the
designated joint holes.
Technical data
UV-stabilized PE synthetic material
Sealing strip height 75 mm
Deck length 100 cm
Ventilation cross section approx. 180 cm²/run. m
Acc. to DIN 4108 for 18 m rafter lengths
Storage in dry rooms almost indefinitely
item unit Designation Length color
number m cm
017376 20 Ventil. cap 103 red
017558 20 Ventil. cap 103 anthr.
017559 20 Ventil. cap 103 brown
03-100 A/P/T 03
60 1006