02 - BTI - We know your business

www.BTI-GROUP.COM
07
D
Alloy (weight ‑%) P 5.9 – 6.5 / Cu remaining
Melting range: 710 – 880 °C
Working temperature: 730 °c
Materials that can
be soldered: copper, red brass,
brass, bronze
Soldering flux insert for: brass, red brass,
Bronze with LP 5
�����
Fitting solder 3
Quality soft solder acc. to DIN 1707 for soft soldering of copper pipes with copper, red brass and brass fittings
in cold and hot water installation in acc. to DVGw worksheet Gw 2, without filling of soldering flux; to be used
with appropriate fittings soldering paste. L-SnCu3, melting range +230 °C to +250 °C, can be used with fitting
soldering paste 3.
Item Unit Soldering wire Design weight
number Pieces dia. g
021218 1/20 2 mm 250 g coil 270
021225 1/20 3 mm 250 g coil 270
07-928 A/P 07928AA
Fitting soldering paste 3
Quality soft solder acc. to DIN EN 29 453, with soldering flux DIN EN 29 454-1 3.1.1., for soft soldering of copper
pipes with copper, red brass and brass fittings in cold and hot water installation in acc. to DVGw worksheet Gw
7; proportion of metal 60 weight %, soldering flux remains can be dissolved to 100 % in water. Proportion of
metal: S-Sn 97 Cu 3, only to be used with fitting solder 3, DVGw tested.
Item Unit Design Content
number Pieces g
021249 1 LP 3 in plastic bottle * 250
024981 1/25 solder brush
07-928 * with solder brush A/P 07928Ac
Soft solder soldering flux FT
In acc. to DIN EN 29 454-1 3.1.1.C, soldering flux type F-a/f 21, for soft soldering of copper pipes in cold-hot
water installation in acc. to DVGw worksheet Gw 7, with mark of conformity DVGw FI 035; also for general soft
soldering work
Item Unit Design Content
number Pieces g
021256 1 in the tube 70
07-928 A/P 07928AD
Hard solder S 94 XN L-CuP6
Quality hard solder, guaranteed acc. to IN 8513, with excellent flow characteristics due to a special
manufacturing process; melts evenly for perfect soldered joints, capillary and close-active; ideal for capillary
gap soldering in sanitary, heating and gas installation
Item Unit Design Square end Length weight
number Pieces Content mm mm g
021263 1 in 1 kg box 2 x 2 500 1,025
07-928 A/P 07928AF
Hard solder soldering flux
Soldering flux for hard soldering at working temperatures above 600 °C, acc. to DIN 8511, Type F-SH 1, DVGwtested
for gas and water installations with copper pipes, recommended by the DVGw in. acc. to worksheet Gw 2
and Gw 7, to be used with hard silver soldering and any base material made of steel, copper and copper alloy,
brass, red brass; effective temperature range 550 – 800 °C; remains of soldering flux must be carefully
removed
Item Unit Design Content weight
number Pieces g g
028750 1 in plastic bottle * 160 180
542 07-928 * with soldering brush A/P 07928AG
1006