02 - BTI - We know your business

1006
CARE + CLEANING
�����
Clear View Summer
Removes smearing, stripes, dirt and insect residue; for a blind-free view
g Crystal clear and blind-free view
Thoroughly removes humid dirt, insect residue
and all smear and blind films; prevents stray light
effects
g Fully compatible with all materials found in the
application area
Does not corrode metals, stove-enamel, rubber,
glass and plastics in the intended application
concentration
g Thanks to a high active agent concentration very
sparing in use
25 ml Clear View Summer is enough for 2.5 l of
water
Range of application:
BTI Clear View Summer is compatible with hard tap
water and thus forms no deposits in the windscreen
wipers and is ideal for vehicles with lights made from
polycarbonate
Wheel cleaner
New spray gel formula for perfect cleaning
g Powerful
Removes tough deposits such as braking dust, road
dirt and road salt residue even on very dirty wheels
g Conserving
The new gel formula strengthens adhesion and
improves the impact on cleaning significantly
g Permanent
Protects the wheels and brake disks from corrosion
g Sparing
The acid-free recipe does not corrode metal, varnish,
rubber and plastic
Range of application:
Especially suitable for top quality varnished and
non-varnished light metal and steel wheels
Processing instructions:
BTI Clear View Summer is added to the windscreen
wiper and light water in a concentration of 1 % (i e.
1 amount for 100 amounts of water). Simply fill the
dosage head by pressing on the lower part of the bottle
with the top screwed on. Excess product runs back into
the bottle when letting go. Tip the remaining 25 ml in
the tank of the windscreen wiper system. Mixed with
2.5 l of water this results in a ready-for-use mixture.
Technical data
Density at 20 °C 1.027 ±0.008
Ph value concentrated 7.5 ±0.5
PH value1:100 diluted with water 7.4 ±0.5
Viscosity low viscosity
Solubility also with hard water
can be mixed spontaneously and clearly
Item Unit Container Content
number Pieces ml
017338 6 bottle 250
The details specified in this publication are based on our current knowledge and experience. Due to the abundance of possible processing and application influences this information does not release the processor from performing his
own tests and trials. Legally binding assurance of certain characteristics or suitability for a concrete implementation objective can not be derived from this information.
08-511
Processing instructions:
Apply wheel cleaner and let it work for 3 – 5 minutes.
Treat with sponge or soft wheel brush for persistent dirt
and in inaccessible places. Increasing residence time to
30 minutes, if required. Then rinse with a strong water
jet or clean with a high pressure cleaner.
Attention: Do not apply to hot wheels or in direct sunlight.
Do not allow wheel cleaner to dry in. Test for compatibility
for later varnished wheels.
Item Unit Container Content
number Pieces ml
000530 6 aerosol bottle 500
08-513
WWW.bTI-gROUP.COM
08
b
615