02 - BTI - We know your business

www.bTI-group.CoM
60
A
�����
Sealant remover
unbeatable on sealants, paint and glue residue
g Easy to use and effective
Special solvent enables easy removal of residue
without damaging the subsurface.
g Can also be used on vertical areas
Due to good adhesion the sealant remover can
also be used on vertical surfaces.
range of application:
Effortless removal of sealants, bonding, hardened glue
residue, paint, lacquer, oil, grease, tar and hardened
resin residue; paint remover for metal surfaces; removes
stickers.
Metal cleaner
powerfully cleans and degreases
g Can be used almost anywhere
Does not damage paintwork or surfaces.
g Above average cleaning results in shorter amount
of time
Removes even the most heavy soiling quickly and
reliably.
g residue-free
Evaporates very quickly without leaving residue
or build up of droplets when used at a constant
temperature.
welding protection spray
prevents damage caused by fused-on spatters
g No laborious reworking
Components and implements are protected from
spatters, thin protective film prevents welding beads
from attaching to the nozzle and to components.
g No costly cleaning required after welding
Components can be treated easily e.g. browning,
painting or galvanising.
g paintwork is not damanged after or during welding
Silicone-free protective film, color and lacquer-resistant
adhesion-preventing film does not build up on adjacent
components.
processing instructions:
Cover up lacquered areas, synthetic materials and
rubber. Shake the can before using. Spray the sealant
remover generously and leave for 10 – 20 minutes.
Remove treated residue with a scraper. Repeat again if
necessary. To remove graffiti, spray lightly and wash off
immediately using a wet sponge or rag. Repeat again
if necessary. Only use in well ventilated areas. Always
check compatibility with lacquer and synthetics in
unobtrusive areas. Bear in mind that the parts can be
manufactured from different materials.
Item unit Container Contents
number pieces ml
016870 6 spray can 300
The details specified in this publication are based on our current knowledge and experience. The consumer is responsible for carrying out his or her own personal checks and tests when using our products to ensure that they are suitable
844 1006
for use in the particular environment. The information contained within this publication does not infer a legally binding assurance of the specific properties or the suitability for a precise intended use.
08-510
range of application:
Preparatory work using lacquer and bonding on metal,
glass, ceramic; cleaning and degreasing of brake disks,
machines and motor components such as sliding,
rubbing and adhesive surfaces; removal of oil and
grease residue such as silicone
processing instructions:
Use a spray pipe for selective spraying, do not use a
spray pipe for spraying surfaces
Item unit Container Contents
number pieces ml
015596 6 spray can 300
08-513
processing instructions:
Shake can before use, spray onto fused-on spatters at
a distance of approx. 15 cm, spray onto components at
a distance of approx. 30 cm in an area 10 cm right and
left of the welded seam. It is possible to begin welding
immediately after spraying in narrow rooms or hollow
parts. Not flammable.
Item unit Container Contents
number pieces ml
015970 6 spray can 300
08-509