02 - BTI - We know your business

WWW.bTI-gROUP.COM
08
A
560
�����
Film adhesive
Elastoplastic adhesive sealing compound on dispersion basis
g High adhesive ability
New, improved recipe
g Solvent-free and odorless
Curing by vaporization of water
Range of application:
For adhesion of water vapor breaks and films made
from PE, PP, PVC, aluminum, paper, cardboard and card
web in various ways to concrete, stone, plaster, wood
without pressing board
Attention:
Do not use under water, for continuous exposure to
water, for glass panes and floor joints.
BONDING + SEALING
Processing instructions:
The surface must be absorbent, firm, clean, dry, stable
and free of grease. Include movement loop for adhesion
of water vapor breaks and locks. Vaporization of the
contained water can cause a small loss to occur when
joining. To achieve a higher initial adhesion the coated
adhesive is aired for some hours until the surface has
gone darker. The final adhesive strength is reached
when after full through hardening (approx. 2 – 3 days).
Contaminations can be removed with water in fresh
state or only mechanically after through hardening.
Technical data
Chemical basis aqueous polyurethane dispersion
Color orange
Consistency paste-like, firm
Density 1.22 g/cm³
Usage temperature +5 to +35 °C
Temperature stability -20 to +80 °C
(hardened adhesive)
Through hardening 1 – 2 mm/day
Item Unit Designation Color Packaging Content
number Pieces ml
017939 1/20 Film adhesive orange cartridge 310
017940 20 film adhesive orange tube 580
08-134 A/P/T 08134AB
The details specified in this publication are based on our current knowledge and experience. Due to the abundance of possible processing and application influences this information does not release the processor from performing his
own tests and trials. Legally binding assurance of certain characteristics or suitability for a concrete implementation objective can not be derived from this information.
1006