Modélisation de l'écoulement diphasique dans les injecteurs Diesel

164 BIBLIOGRAPHIE[19] D. BOULTON-STONE and P. BLAKE. Gas bubbles bursting at a free surface. J. Fluid Mech.,254 :437–466, 1993.[20] J.U. BRACKBILL, D.B. KOTHE, and C. ZEMACH. A continuum method for modeling surfacetension. J. Comp. Phys., 100 :335–354, 1992.[21] M. CALLENAERE, J.P. FRANC, and J.M. MICHEL. Infl uence of cavity thickness and pressuregradient on the unsteady behaviour of partial cavities. In 3rd International Symposium on Cavitation,volume 1, pages 209–214, 1998.[22] G.L. CHAHINE. Interaction between a collapsing bubble and a free surface. Technical report, EcoleNationale Supérieure de Techniques avancées-Paris, 1976.[23] B. CHALLEN and R. BARANESCU. Diesel engine reference book 2nd edition. ButterworthHeinemann, 1999.[24] F. CHARLETTE and J. HELIE. Ntmix 3d q.p.f. http ://www.cerfacs.fr/∼ntmix/QPF/qpf1dwaves.pdf,1997.[25] H. CHAVES. Experimental study of cavitation in the nozzle hole of diesel injectors using transparentnozzles. SAE paper 950290, 1995.[26] H. CHAVES. Communication privée par e-mail. septembre 1999.[27] H. CHAVES, B. MULHEN, and F. OBERMEIER. Comparison of high speed stroboscopic picturesof spray structures of a diesel spray with numerical calculations based on a convective instabilitytheory. In ILASS - Europe ’99, Toulouse, 1999.[28] H. CHAVES and F. OBERMEIER. Correlation between light absorption signals of cavitatingnozzle fl ow within and outside of the hole of a transparent diesel injection nozzle. In ILASS - Europe’98, pages 224–229, Manchester, 1998.[29] B. CHEHROUDI, Y. ONUMA, S.H. CHEN, and F.V. BRACCO. On the intact core of full-conesprays. SAE paper, (850126), 1985.[30] A. CHEN and H. HEISTER. Two-phase modeling of cavitated fl ows. Comp. Fluids, 24(7), 1995.[31] C. CHEN and A. VESHAGH. A simple unified fuel spray model. SAE technical paper 930923,1993.[32] Y. CHEN and S.D. HEISTER. Modeling cavitating fl ows in diesel injectors. Atomization andSprays, 6 :709–726, 1996.[33] A.J. CHORIN. Flame advection and propagation algorithms. J. Comp. Phys., 35 :1–11, 1980.[34] J.P. COCCHI, R. SAUREL, and J.C. LORAUD. Some remarks about the resolution of high velocityfl ows near low densities. Shock Waves, 8 :119–125, 1998.[35] D. COKLJAT, V.A. IVANOV, and S.A. VASQUEZ. Two-phase model for cavitating fl ows. InICMF’98, Lyon, France, 1998.[36] B. COMPAGNON, A. HAUPAIS, and P. LE COTTIER. Evaluation des mécanismes de fractionnementdu jet dans une démarche modélisation. Technical report, C.R.M.T., 1999.[37] P. COOPER. Analysis of single and two phase fl ows in turbopump inducers. Journal of engineeringfor power, Transactions ASME, 1967.[38] K. DATE, H. NOBECHI, H. KANO, M. KATO, and T. OYA. Experimental analysis on fuel fl owcharacteristics in the nozzle for direct injection engines. SAE paper, (931002), 1993.[39] A. DAVIDHAZY. Andrew davidhazy homepage. http ://www.rit.edu/˜andpph/exhibit-3.html.[40] K.J. DEJUHASZ. Dispersion of sprays in solid injection oil engines. Trans. ASME, 53, 1931.[41] B. DELANNOY and H. KUENY. Two phase fl ow approach in unsteady cavitation modeling. ASMECavitation and Multiphase fl ow forum, 98 :153–158, 1990.[42] N. DUMONT. Modélisation de l’écoulement diphasique dans les injecteurs diesel et couplage àl’atomisation : étude bibliographique. Technical Report 53192, IFP, 2000.[43] N. DUMONT, O. SIMONIN, and C. HABCHI. Cavitating fl ows in diesel injectors : a bibliographicalreview. In Eight International Conference on Liquid Atomization and Spray systems ICLASS2000,Pasadena, CA, USA, 2000.