Untitled - eCommons@Cornell - Cornell University

308 SIBLEY COLLEGE.
Numbers i to 4 inclusive denote Freshman subjects.
"
5 to 9
" "
Sophomore
"
10 to 19
" "
Junior
"
20 to 29
" "
Senior
"
30 to 35
" "
Graduate
Three hours in the shops or drawing rooms, or two and one-half
hours in the laboratories count as one hour in the schedule.
Department of Mechanical Engineering. [M.E.]
20. Steam Engines and other Motors. Thermodynamics and
the theory of steam and other heat engines. Fall and winter terms.
Lectures. Five hours. Daily, except S.,
11. Professor Thurston.
21. Applied Theory of Steam and other Engines. Finance of
Design and Operation. Spring term. Two hours. T., Th., 11.
Professor Thurston.
30. Advanced Work in Special Courses and Graduate Work
in Mechanical Engineering. As may be assigned by Professor
Thurston.
31. Finance of Engineering and Economics of Manufactur
ing Establishments. Spring term, elective. Three hours. M.,
W., F., 11. Professor Thurston.
Department of Experimental Engineering. [X.E.]
10. Materials of Engineering. Juniors. One hour. Lectures.
M., 9 ; Th., 9 ; F., 9. Professor Carpenter and Mr. ShanTZ.
11. Mechanical Laboratory. Three hours. Juniors. Fall term.
Lectures. Strength of materials, tension, and transverse testing,
calibrating, dynamometers, steam gauges, weirs, and meters. Winter
term. Lectures. Strength of materials, compression, torsion and
impact testing, oil testing, flue gas analysis, calorimetry, thermo
meter calibration, valve setting and indicator practice. Spring term.
Lectures. Strength of large specimens, special research, strength of
materials, test of durability of mo-
water lubricants, efficiency tests,
tors, centrifugal pumps, gas engines, injectors, steam pumps, and in
dicator practice. One hour of class room work. Daily 2-5. Pro
fessor Carpenter, Messrs. Shantz and Diederichs.
20. Mechanical Laboratory. Two hours. Seniors. Fall term.
Lectures. Efficiency tests, steam boilers, steam engines, turbine
water-wheels, air-compressor, hot air engines, transmission of power
by belting
and gearing. Winter term. Lectures. Test of steam
engine and application of Hirn's analysis, power required to drive
machine tools, test of a steam-heating plant, test of power plants not