CDC 1725/DCC 2725 CDC 1730/DCC 2730 CDC 1740/DCC 2740 ...

Basic Operation
For send to folder (FTP)
Item
Data to be entered
Max.
characters
Host Name* Host name or IP address of FTP server Up to 64
characters
Path
Path to the receiving folder.
For example, \User\ScanData.
Otherwise the data will be saved in the
home directory.
Up to 128
characters
3
Login User
Name
Login
Password
FTP server log-in user name Up to 64
characters
FTP server log-in password Up to 64
characters
* To specify a port number different from the default (21), enter using
the format “host name: port number” (e.g., FTPhostname:140).
To enter the IPv6 address, enclose the address in brackets [ ].
(e.g., [3ae3:9a0:cd05:b1d2:28a:1fc0:a1:10ae]:140)
Folder Path Entry
Ready to send.
Place original.
Destination
5 Upon completion of all entries, press [Connection
Test] to check the connection.
SMB
FTP
Host Name
Path
Login
User Name
Login
Password
NOTE: Connected. appears when connection to the
destination is correctly established. If Cannot connect.
appears, review the entry.
Add to Addr Book
Specify the folder on the destination
computer.
Next Dest.
Cancel
Connection
Test
OK
To specify another destination, go to the step 6. To
specify only one destination, go to step 7.
Status 10/10/2008 10:10
6 Press [Next Dest.] and repeat steps 3 to 5 to
specify the destination. You can specify a
combined total of up to 10 FTP and SMB
destination folders.
NOTE: When [Add to Addr Book] is displayed, the
entry is registered in the Address Book.
7 Press [OK] to register the entry in the destination
list.
OPERATION GUIDE 3-33