CDC 1725/DCC 2725 CDC 1730/DCC 2730 CDC 1740/DCC 2740 ...

Default Setting (System Menu)
3 Press [Block].
4 Press [OK].
Optional interface (Optional interface card setting)
This locks and protects the optional interface slots (OPT1 or OPT2). The default setting is Unblock.
Use the procedure below to specify the optional interface setting.
1 Press the System Menu key.
2 Press [System], [Next] of Interface Block Setting
and then [Change] of Optional Interface 1 or
Optional Interface 2.
NOTE: If user login administration is disabled, the
user authentication screen appears. Enter your login
user name and password and then press [Login]. For
this, you need to log in with administrator privileges.
Refer to Adding a User on page 11-4 for the default
login user name and password.
3 Press [Block].
8
4 Press [OK].
OPERATION GUIDE 8-101