CDC 1725/DCC 2725 CDC 1730/DCC 2730 CDC 1740/DCC 2740 ...

Default Setting (System Menu)
Applications
You can install and use applications that will make your day-to-day use of this machine more efficient.
Starting/Exiting Application Use
To use an application, set the application to License On.
Use the procedure below to start using an application.
1 Press the System Menu key.
2 Press [ ] and then [Application].
NOTE: If user login administration is disabled, the
user authentication screen appears. Enter your login
user name and password and then press [Login]. For
this, you need to log in with administrator privileges.
Refer to Adding a User on page 11-4 for the default
login user name and password.
Application
Manage the applications.
3 Select the desired application and press [License
On].
8
Name
Application 1
Application 2
Version Status
--- Activating
--- Stopped
License
Official
Official
Add
Delete
You can view detailed information on the selected
application by pressing [Detail].
Application 3
--- Activating
Trial
1/1
License
On
License
Off
NOTE: To exit an application, press [License Off].
Print
Report
Detail
Close
Status 10/10/2008 10:10
License On
Enter the activation code to use the application officially.
The activation code is not necessary to use it as a trial.
Activation
Code
********
4 Enter the license key and press [Official].
Some applications do not require you to enter an
license key. If the license key entry screen does not
appear, go to Step 5.
To use the application as a trial, press [Trial] without
entering the license key.
Cancel
Trial
Official
Status 10/10/2008 10:10
OPERATION GUIDE 8-83