CDC 1725/DCC 2725 CDC 1730/DCC 2730 CDC 1740/DCC 2740 ...

Copying Functions
Output Destination
You can use the procedure below to select an output destination such as the optional document finisher for your
copies.
NOTE: Optional output destinations include the job separator, document finisher, 3,000 sheet document
finisher and mailbox.
The table below shows the available output destinations.
Destination
Description
4
Top tray
Finisher Tray*
TrayA,TrayB*,TrayC*
Job Separator Tray
Tray1 to 7*
Top tray of the machine (where copies are stored)
Tray of the optional document finisher
Trays A to C in the optional 3,000 sheet document
finisher
Optional job separator
Trays 1 to 7 in the optional mailbox (tray 1 is the top
tray)
* Copy output orientation can be selected either as face-up (print facing up)
or face-down (print facing down).
NOTE: To change default destination for copies, refer to Paper Output on page 8-18 for details.
Use the procedure below to select the output destination.
1 Press the Copy key.
2 Place the originals on the platen.
3 Press [Org./Paper/Finishing] and then [Paper
Output].
Paper Output
Ready to copy.
Place original.
Copies
Face Up
Face Down
4 Select the output destination for finished copies.
When you select [Finisher Tray], [TrayB], [TrayC] or
[Tray1] to [Tray7], select the orientation of output
copy, Face Up (print facing up) or Face Down (print
facing down).
Top Tray
Tray A
Tray B
Tray C
Original
Zoom
Paper
: ---
: 100%
: ---
Preview
Job Separator
Tray
Tray 1
Tray 2
Tray 3
Tray 4 Tray 5
Tray 6
Tray 7
Add Shortcut
Cancel
OK
Status 10/10/2008 10:10
5 Press [OK].
6 Press the Start key to start copying.
OPERATION GUIDE 4-13