CDC 1725/DCC 2725 CDC 1730/DCC 2730 CDC 1740/DCC 2740 ...

Default Setting (System Menu)
Collate/Offset
Set the defaults for Collate/Offset. The table below shows the available settings.
Item
Description
Collate Off Collate not performed.
On
Collate performed.
Offset Off Offset not performed.
Each Set
(Each Page)
Offset performed. (If [Off]) is selected of
Collate, it is performed [Each Page].)
NOTE: Refer to page 3-19 for Collate/Offset.
Use the procedure below to set the default Collate/Offset settings.
Auto Image Rotation
1 Press the System Menu key.
2 Press [Common Settings], [ ], [Next] of Function
Defaults, [ ] and then [Change] of Collate/Offset.
3 Select the defaults for Collate and Offset
respectively.
4 Press [OK].
Select the default Auto Image Rotation setting. The table below shows the available settings.
Item
Description
Off
On
No Auto Image Rotation performed.
Auto Image Rotation performed.
NOTE: Refer to page 4-43 for Auto Image Rotation.
Use the procedure below to set the default Auto Image Rotation settings.
1 Press the System Menu key.
2 Press [Common Settings], [ ], [Next] of Function
Defaults, [ ] and then [Change] of Auto Image
Rotation.
3 Select the default for [Off] or [On].
4 Press [OK].
8-28 OPERATION GUIDE