CDC 1725/DCC 2725 CDC 1730/DCC 2730 CDC 1740/DCC 2740 ...

Default Setting (System Menu)
For Custom 1-8, settings for duplex printing and media type name can be changed.
Item
Description
Duplex Prohibit Duplex printing not allowed.
Permit
Duplex printing allowed.
Name
Change names for Custom 1-8. Names
should be not more than 15 characters.
Selecting media type at multi purpose tray,
the name after change will be displayed.
Use the procedure below to set the paper weight.
1 Press the System Menu key.
2 Press [Common Settings], [Next] of Original /
Paper Settings and then [Next] of Media Type
Setting.
3 Press [Next] for the media type whose weight you
want to change.
4 Press [Change] of Paper Weight.
5 Select the weight and press [OK].
6 Press [Close].
The previous screen reappears.
7 To change the duplex printing settings for Custom
1 (-8), press [Next] of Custom 1(-8) and then
[Change] of Duplex. Select [Prohibit] or [Permit]
and press [OK].
The previous screen reappears.
8 Press [Close].
9 To change the name for Custom 1(-8), press [Next]
of Custom 1(-8) and then [Change] of Name. Enter
the name and press [OK].
NOTE: Refer to the Character Entry Method on
Appendix-7 for details on entering characters.
8-12 OPERATION GUIDE