CDC 1725/DCC 2725 CDC 1730/DCC 2730 CDC 1740/DCC 2740 ...

Default Setting (System Menu)
Default Paper Source
Select the default paper source from Cassette 1-4 and Multi Purpose Tray.
NOTE: [Cassette 3] is displayed when either of the optional paper feeder or 3,000 sheet paper feeder is
installed, and [Cassette 4] is displayed when the optional paper feeder is installed.
Use the procedure below to select the default paper source.
1 Press the System Menu key.
2 Press [Common Settings], [Next] of Original /
Paper Settings and then [Change] of Default Paper
Source.
3 Select a paper cassette for the default setting.
4 Press [OK].
Automatic Detection of Originals (Available for metric models only)
Automatically detect originals of special or non-standard size.
The table below lists the special or non-standard original sizes.
8
A6/Hagaki
Folio
Item
Description
As A6 and Hagaki are similar in size, select
either one of them for automatic detection.
Select Folio for automatic detection.
11x15" Select the 11×15" size for automatic
detection.
Use the procedure below to set automatic detection of originals.
1 Press the System Menu key.
2 Press [Common Settings], [Next] of Original /
Paper Settings and then [Change] of Original Auto
Detect.
3 Select [A6] or [Hagaki] of A6/Hagaki.
Select [Off] to disable automatic detection or [On]
to enable automatic detection of Folio and 11x15"
respectively.
4 Press [OK].
OPERATION GUIDE 8-13