CDC 1725/DCC 2725 CDC 1730/DCC 2730 CDC 1740/DCC 2740 ...

Basic Operation
Adjusting Density
Use this procedure to adjust the density when copying.
Density Adjustment Option
Manual
Auto
Description
Adjust density using 7 or 13 levels.
Optimum density is selected according
to the density of the original.
3
NOTE: You may choose Auto mode as the default setting (refer to Density on page 8-24).
The procedure for adjusting the density of copies is explained below.
1 Press the Copy key.
2 Place the originals on the platen.
3 Set the original on the platen and press [Color/
Image Quality] -> [Density].
Density
Ready to copy.
Copies
4 Adjust density manually pressing [-3] (Lighter) to
[+3] (Darker). You can change the density level [-3]
(Lighter) to [+3] (Darker) in half-steps.
Place original.
Auto
Lighter
Normal
Darker
To change density adjustment from Manual to Auto,
press [Auto].
Original
Zoom
Paper
: ---
: 100%
: ---
Preview
-3 -2 -1 0 +1 +2 +3
-2.5 -1.5 -0.5 +0.5 +1.5 +2.5
Add Shortcut Cancel OK
Status 10/10/2008 10:10
5 Press [OK].
6 Press the Start key. Copying begins.
OPERATION GUIDE 3-13