CDC 1725/DCC 2725 CDC 1730/DCC 2730 CDC 1740/DCC 2740 ...

Default Setting (System Menu)
Density
Set the default density. The available default settings are shown below.
NOTE: You cannot specify the density if you have selected [Full Color] in Color Selection.
Item
Manual (Normal 0)
Auto
Description
Set to (Normal 0) in the Manual density.
Set to Auto density.
Use the procedure below to select the default zoom setting.
Zoom
1 Press the System Menu key.
2 Press [Common Settings], [ ], [Next] of Function
Defaults, [ ] and then [Change] of Density.
3 Select the default density.
4 Press [OK].
Select the enlarged/reduced default when paper size/sending size changed after the originals set. The available
default settings are shown below.
Item
Description
100% Copy (send/save) at actual size (100%).
Auto
Automatically reduce or enlarge the
originals to match paper size/ sending size.
Use the procedure below to select the default zoom setting.
1 Press the System Menu key.
2 Press [Common Settings], [ ], [Next] of Function
Defaults, [ ] and then [Change] of Zoom.
3 Select the default zoom setting.
4 Press [OK].
8-24 OPERATION GUIDE