CDC 1725/DCC 2725 CDC 1730/DCC 2730 CDC 1740/DCC 2740 ...

Sending Functions
Original Size Selection
Select the size of originals that will serve as the basis for scanning. Be sure to select the original size when using
originals of nonstandard sizes.
Choose the original size from the following groups of original size.
Item Detail Size
Standard
Sizes 1
Standard
Sizes 2
Others
Size Entry
Select from
automatic
detection and
standard sizes.
Select from
standard sizes
except Standard
Sizes 1 .
Select from
Hagaki and
Custom Original
Size *.
Enter the size
that is not
indicated in
Standard Sizes
1 and 2**.
Inch models: Auto, Ledger, Legal,
Letter, Letter-R, Statement,
Statement-R, 8.5×13.5", Oficio II-R,
11×15"
Metric models: Auto, A3, B4, A4,
A4-R, B5, B5-R, A5, A5-R, B6, B6-R,
A6-R, Folio
Inch models: A3, B4, A4, A4-R, B5,
B5-R, A5, A5-R, B6, B6-R, A6-R,
Folio, 8K, 16 K, 16K-R
Metric models: Ledger, Legal, Letter,
Letter-R, Statement, Statement-R,
8.5×13.5", Oficio II-R, 11×15", 8K,
16K, 16K-R
Hagaki, Oufuku Hagaki, Custom 1 to 4
Inch models
Horizontal: 2 to 17" (in 0.01"
increments), Vertical: 2 to 11.69" (in
0.01" increments)
Metric models
Horizontal: 50 to 432 mm (in 1 mm
increments), Vertical: 50 to 297 mm (in
1 mm increments)
* Regarding the setting method of Custom Original Size (Custom 1 to
4), refer to Custom Original Size Setup on page 8-5.
** The input units can be changed in the System menu.
Refer to Switching Unit of Measurement on page 8-16.
Use the procedure below to select the original size when sending scanned images.
1 Press the Send key.
2 Place the originals on the platen.
3 Press [Original/Sending Data Format] and then
[Original Size].
5-2 OPERATION GUIDE