CDC 1725/DCC 2725 CDC 1730/DCC 2730 CDC 1740/DCC 2740 ...

Default Setting (System Menu)
Special Paper Action
When printing on Prepunched, Preprint, and Letterhead, punch-holes might not be aligned or the print direction
might be upside-down depending on how originals are set and the combination of copying functions. In such a
case, select [Adjust Print Direction] to adjust the print direction. When paper orientation is not important, select
[Speed Priority].
The table below lists the available settings and their details.
Item
Adjust Print Direction
Speed Priority
Description
Adjust print direction. Print speed is a little
slower. Select this item to print on
Prepunched, Preprint and Letterhead.
Give the job speed top priority and
disregard the paper orientation. Select this
item when paper orientation is not
important.
If you select [Adjust Print Direction], load paper according to the steps below.
Example: copying on Letterhead
8
Original
Paper
Finished
Cassette
Multi Purpose Tray
Original
Paper
Finished
Cassette
Multi Purpose Tray
NOTE: When loading cover paper in a cassette or multi purpose tray, load the face, on which printing is
supposed to be done, upward.
Use the procedure below to specify the actions performed for special paper types.
1 Press the System Menu key.
2 Press [Common Settings], [Next] of Original /
Paper Settings, [ ] and then [Change] of Special
Paper Action.
3 Select [Adjust Print Direction] or [Speed Priority].
4 Press [OK].
OPERATION GUIDE 8-15