CDC 1725/DCC 2725 CDC 1730/DCC 2730 CDC 1740/DCC 2740 ...

Default Setting (System Menu)
Repeat Copying
Select the Repeat Copy default. The options are as follows. The table below shows the available settings.
Item
Description
Off
On
No Repeat Copy is performed.
Repeat Copy is performed.
NOTE: This setting is not displayed when the optional Data Security Kit is installed or the Repeat Copy job is
set to 0.
Refer to page 4-50 for Repeat Copy.
Use the procedure below to set the default Repeat Copy setting.
1 Press the System Menu key.
2 Press [Common Settings], [ ] and [Next] of
Function Defaults. Press [ ] twice and [Change] of
Repeat Copy.
3 Select the default for [Off] or [On].
8
4 Press [OK].
OPERATION GUIDE 8-31