CDC 1725/DCC 2725 CDC 1730/DCC 2730 CDC 1740/DCC 2740 ...

Management
User Login/Job Accounting - User Login
Off
Local
Authentication
Network
Authentication
Expansion
Authentication
User login administration.
Select authentication method.
Host Name
Domain Name
Server Type
NTLM
Kerberos
# Keys
5 Select [Local Authentication] or [Network
Authentication]. Select [Off] to disable user login
administration.
If you select [Network Authentication], enter the
host name (62 characters or less) and domain
name (256 characters or less) for the
Authentication Server. Select [NTLM] or [Kerberos]
as the server type.
Status
Cancel
OK
10/10/2008 10:10
NOTE: If the login user name and password are
rejected, check the following settings.
• Network Authentication setting of the machine
• User property of the Authentication Server
• Date and time setting of the machine and the
Authentication Server
If you cannot login because of the setting of the
machine, login with any administrator registered in the
local user list and correct the settings.
If the server type is [Kerberos], only domain names
entered in uppercase will be recognized.
6 Press [OK].
Login/Logout
Once you enable user login administration, a login user name and password entry screen appears each time
you use this machine.
Login
Log in using the procedure below.
11
Enter login user name and password.
1 If the screen below appears during the operations,
press [Login User Name].
Login to:
Login
User Name
Local
abcdef
Press [# keys] to enter the login data using the
numeric keys.
# Keys
Login
Password
********
# Keys
IC Card
Login
Check Counter
Cancel
Login
Status 10/10/2008 10:10
2 Enter the login user name and press [OK].
NOTE: Refer to the Character Entry Method on
Appendix-7 for details on entering characters.
OPERATION GUIDE 11-3