CDC 1725/DCC 2725 CDC 1730/DCC 2730 CDC 1740/DCC 2740 ...

Preparation before Use
Connecting USB Cable
Follow the steps below to connect a USB cable to the machine.
1 When the machine is powered up, first press the
Power key on the operation panel. Check that the
Power indicator and the memory indicator are off.
After this, turn off the main power switch.
Check that
the indicators
are off.
2 Connect the USB cable to the appropriate interface
located on the right side of the body.
Connecting the Power Cable
3 Connect the other end of the cable to the PC.
Connect one end of the supplied power cable to the machine and the other end to a power outlet.
IMPORTANT: Only use the power cable that comes with the machine.
2-6 OPERATION GUIDE