CDC 1725/DCC 2725 CDC 1730/DCC 2730 CDC 1740/DCC 2740 ...

Status / Job Cancel
Reordering Print Jobs
This function allows you to select a queued print job and raise its output priority.
NOTE: You cannot assign a higher priority than the job currently being printed or jobs that have been queued
due to an interruption. Nor can you assign a priority higher than a job being processed.
You cannot lower a job's priority.
The procedure for reordering print jobs is explained below.
1 Press the Status/Cancel key.
2 Press the [Printing Jobs].
Status
Status
Log
Job Type All
Job No. End Date Type Job Name User Name Result
3 Select the job to be assigned a higher priority and
press [Move Up].
The priority of the selected job is increased by 1 .
000081 01/25 14:14 doc20070506142153
AAAAA
000082 01/25 14:22 doc20070506142210
AAAAA
000083 01/25 14:30 doc20070506142368
AAAAA
InProcess
Waiting
Waiting
1/1
To further raise the job's priority, press [Move Up]
again. Each time you press [Move Up], the priority
increases by 1.
7
Pause All
Print Jobs
Cancel
Priority
Override
Move Up
Detail
Printing Jobs
Status
Sending Jobs
Storing Jobs
Device/
Communication
Paper/Supplies
2008/10/10 10:10
OPERATION GUIDE 7-15