CDC 1725/DCC 2725 CDC 1730/DCC 2730 CDC 1740/DCC 2740 ...

Default Setting (System Menu)
IPSec Setting
Sets up IPSec. The default setting is Off.
Use the procedure below to specify the IPSec settings.
1 Press the System Menu key.
2 Press [System], [Next] of Network Security, and
then [Change] of IPSec.
NOTE: If user login administration is disabled, the
user authentication screen appears. Enter your login
user name and password and then press [Login]. For
this, you need to log in with administrator privileges.
Refer to Adding a User on page 11-4 for the default
login user name and password.
3 Press [On].
4 Press [OK].
5 After changing the setting, restart the system or
turn the machine OFF and then ON again.
8
For detailed information on restarting the system,
refer to Restarting the System on page 8-88.
OPERATION GUIDE 8-99