CDC 1725/DCC 2725 CDC 1730/DCC 2730 CDC 1740/DCC 2740 ...

Default Setting (System Menu)
Switching Unit of Measurement
Select inch or metric for the unit for paper dimensions.
Use the procedure below to change the input units.
1 Press the System Menu key.
2 Press [Common Settings] and then [Change] of
Measurement.
3 Select [mm] for metric or [inch] for inch.
4 Press [OK].
Error Handling
Select whether to cancel or continue the job when error has occurred. The possible errors and what to do for
the errors are as follows.
Duplexing Error
Select what to do when duplex printing is not possible for the selected paper size and media type.
Item
Description
1-sided
Display Error
Printed in 1-sided
Error message to cancel printing is
displayed.
Finishing Error
Select alternative actions when finishing (stapling or offsetting) is not available for the selected paper size or
media type.
Ignore
Processing
Display Error
Description
The setting is ignored and the job is
printed.
Error message to cancel printing is
displayed.
8-16 OPERATION GUIDE