CDC 1725/DCC 2725 CDC 1730/DCC 2730 CDC 1740/DCC 2740 ...

Default Setting (System Menu)
Installing Applications
You can install new applications.
Use the procedure below to install an application.
1 Insert the USB memory containing the application
to be installed into the USB memory slot (A1).
2 Press the System Menu key.
3 Press [ ] and then [Application].
NOTE: If user login administration is disabled, the
user authentication screen appears. Enter your login
user name and password and then press [Login]. For
this, you need to log in with administrator privileges.
Refer to Adding a User on page 11-4 for the default
login user name and password.
Application
4 Press [Add].
Manage the applications.
Name
Version
Status
License
Add
8
Application 1
--- Activating
Official
Application 2
---
Stopped
Official
Delete
Application 3
--- Activating
Trial
1/1
License
On
License
Off
Print
Report
Detail
Close
Status 10/10/2008 10:10
Application - Add
Insert the removable memory and select the application to be installed.
more applications can be installed.
Name
Version Type/Result of Installation
Application 1
Activating Succeeded
Application 2
Activating Succeeded
5 Select the application to be installed and press
[Install].
You can view detailed information on the selected
application by pressing [Detail].
Application 3
Activating
Succeeded
1/1
Remove
Memory
Install
Detail
Close
Status 10/10/2008 10:10
6 When the confirmation screen appears, press
[Yes].
Installation of the application begins. Depending on
the application being installed, the installation may
take some time.
OPERATION GUIDE 8-85