CDC 1725/DCC 2725 CDC 1730/DCC 2730 CDC 1740/DCC 2740 ...

Default Setting (System Menu)
Original/Paper Settings
Register additional types and sizes of originals and paper.
Custom Original Size Setup
Set up frequently-used custom original sizes. The custom size options are displayed on the screen to select
original size. The dimensions available are as follows.
The table below lists the sizes that can be registered.
Input units
Inch models
Metric models
Dimensions
X: 2 to 17" (in 0.01" increments)
Y: 2 to 11.69" (in 0.01" increments)
X: 50 to 432 mm (in 1 mm increments)
Y: 50 to 297 mm (in 1 mm increments)
Up to four custom original sizes can be added. Use the procedure below to set a custom original size.
1 Press the System Menu key.
2 Press [Common Settings], [Next] of Original /
Paper Settings and then [Next] of Custom Original
Size.
8
3 Press [Change] of any one of Custom 1 to Custom
4, on which you wish to register the size.
4 Press [On], and then press [+],[–] or numeric keys
to enter X(horizontal) and Y (vertical) dimensions.
5 Press [OK].
OPERATION GUIDE 8-5