CDC 1725/DCC 2725 CDC 1730/DCC 2730 CDC 1740/DCC 2740 ...

Copying Functions
Border Erase to Back Page
When scanning a 2-sided original, this allows you to erase the borders on the back of the original. The table
below shows the available settings.
Item
Same as Front
Page
Do Not Erase
Detail
Border Erase performed using the same setting
as the front page
No Border Erase performed on the back page
NOTE: You can change the default setting for Border Erase to Back Page. For details, refer to Border Erase
for Back Page on page 8-32.
Use the procedure below to erase borders when copying.
1 Press the Copy key.
2 Place the originals on the platen.
3 Press [Layout/Edit] and then [Border Erase].
Border Erase
Original
Zoom
Paper
Ready to copy.
Place original.
:
---
: 100%
:
---
Off
Border Erase
Sheet
Border Erase
Book
Individual
Border Erase
Border
(0 - 50)
6 mm
# Keys
Gutter (0 - 50)
6 mm
Copies
Same as
Front Page
Back Page
4 Select [Border Erase Sheet] to erase borders for an
individual sheet or [Border Erase Book] to erase
borders for a book.
Use [+] or [–] to enter the width in Border or Gutter.
Press [# Keys] to use the numeric keys for entry.
Preview
# Keys
Add Shortcut Cancel OK
Status 10/10/2008 10:10
Ready to copy.
Copies
Press [Individual Border Erase] to select the
individual border erase.
Border Erase
Original
Zoom
Paper
Place original.
: ---
: 100%
: ---
Preview
Off
Border Erase
Sheet
Border Erase
Book
Individual
Border Erase
(0 - 50)
Top 6
mm
Bottom 6
mm
Left 6
mm
Right 6
mm
# Keys
Same as
Front Page
Back Page
Top Edge Top
Original
Orientation
Use [+] or [–] to enter the width in Top, Bottom, Left
or Right. Press [# Keys] to use the numeric keys for
entry.
Press [Original Orientation] to select the original
orientation from either [Top Edge Top] or [Top Edge
Left]. Then press [OK].
Add Shortcut
Cancel
OK
10/10/2008 Status 10:10
For 2-sided originals, press [Back Page] and then
press [Same as Front Page] or [Do Not Erase].
5 Press [OK].
6 Press the Start key to start copying.
4-28 OPERATION GUIDE