CDC 1725/DCC 2725 CDC 1730/DCC 2730 CDC 1740/DCC 2740 ...

Sending Functions
Original Orientation
To send the document in the orientation that can be read properly, specify the upper orientation of original. To
use the functions below, select the orientation in which the original is set on the platen.
• 1-sided / 2-sided Selection
• Border Erase
* If [On] is selected as the Orientation Confirmation (page 8-19) setting in the System Menu, the selection
screen for original orientation appears when you select any of the above functions.
When placing the original on the platen
Original [Top Edge Top] [Top Edge Left]
When placing the original on the optional document processor
Original [Top Edge Top] [Top Edge Left]
Use the procedure below to select the orientation when placing the originals on the platen for sending.
1 Press the Send key.
2 Place the originals on the platen.
3 Press [Original/Sending Data Format] and then
[Original Orientation].
5-12 OPERATION GUIDE