CDC 1725/DCC 2725 CDC 1730/DCC 2730 CDC 1740/DCC 2740 ...

Default Setting (System Menu)
Auto Error Clear ON/OFF
Select whether to use Auto Error Clear or not.
Use the procedure below to specify the auto error clear setting.
Error Clear Timer
1 Press the System Menu key.
2 Press [ ], [Date/Timer] and then [Change] of Auto
Error Clear.
3 Press [Off] or [On].
4 Press [OK].
If you select [On] for Auto Error Clear, set the amount of time to wait before automatically clearing errors. Options
are between 5 and 495 seconds (every five seconds).
If you set 0 as the time, errors are not displayed.
NOTE: If you select [Off] for Auto Error Clear, the time display does not appear.
Use the procedure below to set the automatic error clear delay.
Interrupt Clear Timer
1 Press the System Menu key.
2 Press [ ], [Date/Timer], [ ] and then [Change] of
Error Clear Timer.
3 Press [+] or [–] to enter the time until printing
restarts.
You cannot use the number keypad to enter this
value.
4 Press [OK].
Set the period after which the machine reverts to Normal mode when it has been set to Interrupt Copy mode
and then left unused. Any period between 5 and 459 seconds (in five-second increments) can be set.
The procedure for setting the interrupt clear timer is explained below.
1 Press the System Menu key.
2 Press [ ], [Date/Timer], [ ] and then [Change] of
Interrupt Clear Timer.
3 Press [+] or [-] to enter the time for the interrupt
clear timer.
4 Press [OK].
8-70 OPERATION GUIDE