CDC 1725/DCC 2725 CDC 1730/DCC 2730 CDC 1740/DCC 2740 ...

Default Setting (System Menu)
Once the installation ends, the original screen
reappears.
7 To install another application, repeat steps 5 to 6.
8 To remove the USB memory, press [Remove
Memory] and wait until the Removable Memory can
be safely removed message appears. Then
remove the USB memory.
Deleting Applications
Use the procedure below to delete an installed application.
IMPORTANT: Always exit the application to be deleted before deleting the application. (Refer to Starting/Exiting
Application Use on page 8-83.)
1 Press the System Menu key.
2 Press [ ] and then [Application].
NOTE: If login administration is disabled, the user
authentication screen appears. Enter your login user
name and password and then press [Login]. For this,
you need to log in with administrator privileges. Refer
to Adding a User on page 11-4 for the default login user
name and password.
Application
Manage the applications.
3 Select the application to be deleted and press
[Delete].
Name
Application 1
Application 2
Version Status
--- Activating
--- Stopped
License
Official
Official
Add
Delete
You can view detailed information on the selected
application by pressing [Detail].
Application 3
--- Activating
Trial
1/1
License
On
License
Off
Print
Report
Detail
Close
Status 10/10/2008 10:10
4 When the deletion confirmation screen appears,
press [Yes]. The application is deleted.
8-86 OPERATION GUIDE