CDC 1725/DCC 2725 CDC 1730/DCC 2730 CDC 1740/DCC 2740 ...

Default Setting (System Menu)
NOTE: To change to a media type other than Plain, refer to Paper Weight on page 8-11
Use the procedure below to select the paper size and media type for manual paper feed.
1 Press the System Menu key.
2 Press [Common Settings], [Next] of Original /
Paper Settings, [Next] of MP Tray Setting and then
[Change] of Paper Size.
3 To detect paper size automatically, press [Auto]
and select Metric or Inch for Paper Size.
To select paper size, press [Standard Sizes 1],
[Standard Sizes 2], [Others] or [Size Entry] for
Paper Size.
If you select [Size Entry], press [+], [–] to enter X
(horizontal) and Y (vertical) dimensions.
Press [# keys] to enter the paper size using the
numeric keys.
4 Press [OK]. The previous screen reappears.
5 Press [Change] of Media Type to select the media
type and press [OK].
8-10 OPERATION GUIDE