CDC 1725/DCC 2725 CDC 1730/DCC 2730 CDC 1740/DCC 2740 ...

Default Setting (System Menu)
Date Format
Select the display format of year, month, and date. The year is displayed in Western notation.
Use the procedure below to select the date format.
Time Zone
Set the time difference in the location you are from GMT.
Use the procedure below to set the time difference.
1 Press the System Menu key.
2 Press [ ], [Date/Timer] and then [Change] of Date
Format.
3 Select [MM/DD/YYYY], [DD/MM/YYYY], or [YYYY/
MM/DD] and press [OK].
1 Press the System Menu key.
2 Press [ ], [Date/Timer] and then [Change] of Time
Zone.
3 Select the location.
8
NOTE: Press [ ] or [ ] to select the location.
4 Press [Off] or [On] of Summer Time and press [OK].
NOTE: If you select a region that does not utilize
summer time, the summer time setting screen will not
appear.
Auto Panel Reset
If no jobs are run for a certain period of time, automatically reset settings and return to the default setting.
NOTE: Refer to page 8-20 for the default settings.
Auto Panel Reset ON/OFF
Select to use Auto Panel Reset or not.
Use the procedure below to specify the auto panel reset setting.
1 Press the System Menu key.
2 Press [ ], [Date/Timer] and then [Change] of Auto
Panel Reset.
OPERATION GUIDE 8-67