CDC 1725/DCC 2725 CDC 1730/DCC 2730 CDC 1740/DCC 2740 ...

Sending Functions
Color / Grayscale / Black and White Selection
This feature allows you to select the select the color mode used for scanning when sending images. You can
select from Auto(Color/Gray), Auto(Color/B & W), Full Color, Grayscale or Black & White.
Use the procedure below to select the color mode when sending scanned images.
1 Press the Send key.
2 Place the originals on the platen.
3 Press [Color/Image Quality] and then [Color
Selection].
Ready to send.
Place original.
Destination
4 Select the color mode to be used for scanning.
Color Selection
Place original.
Select scanning color.
Select [Auto Color] to automatically send color originals
in full color and black & white originals in black & white.
Original
Zoom
Paper
: ---
: 100%
: ---
Preview
Auto Color
(Color/Gray)
Full Color
Auto Color
(Color/B & W)
Grayscale
Black & White
Add Shortcut
Cancel
OK
Status 10/10/2008 10:10
5 Press [OK].
6 Specify the destination, and press the Start key to
start sending.
5-24 OPERATION GUIDE