CDC 1725/DCC 2725 CDC 1730/DCC 2730 CDC 1740/DCC 2740 ...

Default Setting (System Menu)
File Name Entry
Set an automatically entered name (default) for jobs. Additional information such as Date and Time and Job No.
can also be set.
NOTE: Refer to page 4-48 and page 5-28 for name entry.
Use the procedure below to set the default file name.
1 Press the System Menu key.
2 Press [Common Settings], [ ], [Next] of Function
Defaults, [ ] and then [Change] of File Name
Entry.
3 Press [File Name] to enter the file name in not more
than 32 characters.
NOTE: Refer to the Character Entry Method on
Appendix-7 for details on entering characters.
4 Press [OK].
5 Press [Date and Time] to add the date/time to the
job, or press [Job No.] to add the job number to the
job. The added information will be displayed in
Additional Info.
8
6 Press [OK].
OPERATION GUIDE 8-25